Machining Center

#15 vertical machining center (all-purpose model KIWAMI-series)

MKN-115VT

Vertical type MKN-115VT is a compact machining center with BT15
spindle nose , best suitable for small precision parts like Base plate of
Hard Disc Drive.
This small and light machine provides you with ultimate high speed and
high accuracy.

Max. Spindle speed	20,000min-1
Travel	150×150+50×150(200)mm(X×Y×Z)
Spindle Taper	7/24-taper No.15
NC Unit	MITUBISHI M70VB

---

CHARACRERISTIC  |MACHINE SPECIFICATION

CHARACRERISTIC

High Speed

Rapid travers rate:50m/min, Acceleration:11.8m/sec2   Max.Spindle speed :20,000min-1, Max.Tapping speed:8,000min-1

High precision Spindle

The Spindle motor-stand united with the ATC-stand has increased the spindle rigidty and allowed to improve spindle accuracy because of decreasing the joining face of the spindle and the motor.

The cast Bed of three supports will be permitted to decrease setting time and leveling time

The steel Table Cover has the simple structure and the high endurance.

CHARACRERISTIC|MACHINE SPECIFICATION

MACHINE SPECIFICATION

Item		Unit	Specification	Option
Spindle	Taper	mm	7/24- taper No.15
	Max. Spindle speed	min-1	20,000
	Max. Tapping speed	min-1	8,000
Travel	X- axis	mm	150
	Y- axis	mm	150+50
	Z- axis	mm	150+50(ATC) or 200+50(ATC)
Feed rate	Rapid traverse rate	m/min	50
	Acceleration	m/sec2	X･Y･Z：11.8
	Cutting feed rate	mm/min	1-20,000
Table	Table size	mm	300×265
	Max. load capacity	kg	40
ATC-unit	Magazine capacity	pcs	20
Motor	For spindle	kW	1.5/3.0 (continuity /10min)
Others	Floor Space	mm	790×1,462
	Machine height	mm	1,999
	NC-unit		MITUBISHI M70VB

---