Machining Center
#30 vertical machining center (inline type KIWAMI-series)
MKN-350VT/370VT
The line type machine which targeted for aluminum parts of motor cycles and automobiles.The initial cost and running cost can be reduced substantially when compared with a #40 machining center line.
| Max. Spindle speed | 10,000min-1 |
| Travel | 500(700)×400×320+80mm(ATC) |
| Spindle Taper | 7/24-taper No.30 |
| NC Unit | FANUC 0i-MB |
| CHARACRERISTIC |MACHINE SPECIFICATION |
| CHARACRERISTIC |
Multi-face machining of a large work piece is realized | ||||||||||||
| ||||||||||||
|
Decrease in non-cutting time | ||||||||||||
| ||||||||||||
|
High Productivity | ||||||||||||
|
| CHARACRERISTIC|MACHINE SPECIFICATION |
| MACHINE SPECIFICATION |
| Item | Unit | 350VT | 370VT | Option | |
| Spindle | Taper | mm | 7/24- taper No.30 | ||
| Max. Spindle speed | min-1 | 10,000 | |||
| Max. Tapping speed | min-1 | 5,000 | |||
| Travel | X- axis | mm | 500 | 700 | |
| Y- axis | mm | 400 | |||
| Z- axis | mm | 320+80(ATC) | |||
| Feed rate | Rapid traverse rate | m/min | X Y Z:60 | ||
| Acceleration | m/sec2 | X Z:14.7 Y:11.8 | |||
| Cutting feed rate | mm/min | 1-20,000 | |||
| ATC-unit | Magazine capacity | pcs | 24 | *36 | |
| Motor | For spindle | kW | 3.7/5.5 (continuity / 15min) | ||
| Others | Floor Space | mm | 1,600×2,745 | ||
| Machine height | mm | Max.2,655(High column Max.2,755) | |||
| NC-unit | FANUC 01i-MA | ||||
