Machining Center
#40 horizontal machining center (inline type MBN-series)
Various Performance model MBN-450Hα
This multi use type machining center adopted an in-line or out-line makes to decrease non-cutting time and has a lot of tools in a Magazine to meet high productivity through various machining process is very useful to divided and integral processes.
| Max. Spindle speed | 10,000min-1 |
| Travel | 500×500×500mm(X×Y×Z) |
| Spindle Taper | 7/24 taper No.40 |
| NC Unit | FANUC 31i-MA |
| CHARACTERISTIC |MACHINE SPECIFICATION |
| CHARACTERISTIC |
It is possible to use flexibly for divided and integral processes. | ||||||||
| ||||||||
|
Decrease non-cutting time at about 30% (comparison the conventional machine, MBN-450H) | ||||||||
| ||||||||
|
Nearly twice as machining capacity as the conventional machine "MBN-450H" | ||||||||
| ||||||||
|
Improvement for Operation and Productivity | ||||||||
|
| CHARACTERISTIC| MACHINE SPECIFICATION |
| MACHINE SPECIFICATION |
| Item | Unit | Specification | Option | |
| Spindle | Taper | mm | 7/24- taper No.40 | *HSK-A63,KM63 |
| Max. SP. speed | min-1 | 10,000 | *15,000 | |
| Max. Tapping speed | min-1 | 4,000 | ||
| Travel | X- axis | mm | 500 | |
| Y- axis | mm | 500 | ||
| Z- axis | mm | 500 | ||
| Feed rate | Rapid traverse rate | m/min | X Y Z : 60 | |
| Acceleration | m/sec2 | 9.8 (1G) | ||
| Cutting feed rate | mm/min | 1-20,000 | ||
| ATC-unit | For spindle | pcs | 16 | *30,44,58 |
| Motor | For spindle | kW | 11/18.5(contiuity/30min) | |
| Others | Floor Space | mm | 1,400×3,750 | |
| Machine height | mm | 2,460(with Cover) | ||
| NC-unit | FANUC 31i-MA | |||
