Machining Center
#40 horizontal machining center (inline type MBN-series)
Various Performance model MBN-450Hα
This multi use type machining center adopted an in-line or out-line makes to decrease non-cutting time and has a lot of tools in a Magazine to meet high productivity through various machining process is very useful to divided and integral processes.
| Max. Spindle speed | 10,000min-1 |
| Travel | 500×500×500mm(X×Y×Z) |
| Spindle Taper | 7/24 taper No.40 |
| NC Unit | FANUC 31i-MA |
Standard model MBN-450H
MBN-450H "the core of the this company's FTL and FMS" is low cost and simple function machine, which has high-speed and can ran high precision machining.
This production-type machining center can easily put in the Transfer-Line that meet various work-piece machining.
This production-type machining center can easily put in the Transfer-Line that meet various work-piece machining.
| Max. Spindle speed | 8,000min-1 |
| Travel | 500×400×500mm(X×Y×Z) |
| Spindle Taper | 7/24-taper No.40 |
| NC Unit | FANUC 31i-MA |
Heavy Machining model MBN-455HN
This production-type machining center makes both heavy machining and higher speed machining in comparison with the conventional #40-MC, and can easily put in the Transfer-Line that meet high productivity.
| Max. Spindle speed | 12,000min-1 |
| Travel | 550×400×500mm(X×Y×Z) |
| Spindle Taper | 7/24-taper No.40 |
| NC Unit | FANUC 31i-MA |
#30 horizontal machining center (inline type MBN-series)
Standard model MBN-350Hα
MBN-350Hα "the high performance machine which makes high productivity" meets various machining in place of the #40 MC's.
| Max. Spindle speed | 10,000min-1 |
| Travel | 500×400×500mm(X×Y×Z) |
| Spindle Taper | 7/24-taper No.30 |
| NC Unit | FANUC 31i-MA |
#30 vertical machining center (all-purpose model KIWAMI-series)
MKN-355VC(J)
Totally evolved machine with a jig changer.Targeting large work pieces of automobiles and motorcycles for a wider machining area.
| Max. Spindle speed | 10,000min-1 |
| Travel | 550×320×320+80mm(ATC) |
| Spindle Taper | 7/24-taper No.30 |
| NC Unit | FANUC 31i-MA |
MKN-335VCJ
The most eminent machine for high-precision , small-part machininng
Mounted with a jig changer that can enhance the productivity
Mounted with a jig changer that can enhance the productivity
| Max. Spindle speed | 22,000min-1 |
| Travel | 350×220×250+80(ATC)mm |
| Spindle Taper | 7/24-taper No.30 |
| NC Unit | MITUBISHI M70A |
MKN-335VT
Best performance in high-precision machining for small components
Table traverse type to achieve high productivity
Table traverse type to achieve high productivity
| Max. Spindle speed | 22,000min-1 |
| Travel | 350×200+100(Unload)×250+80(ATC)mm(X×Y×Z) |
| Spindle Taper | 7/24-taper No.30 |
| NC Unit | MITUBISHI M70VB |
Table Traverse model MEN-500V
This cost performance machine meets low-cost, high-rigidity and high-rapid traverse, and is the table traverse machining center with wide machining area for large work-pieces.
| Max. Spindle speed | 10,000min-1 |
| Travel | 500×320×250+80(ATC)mm(X×Y×Z) |
| Spindle Taper | 7/24-taper No.30 |
| NC Unit | FANUC 0i-MB |
#30 vertical machining center (inline type KIWAMI-series)
MKN-350VT/370VT
The line type machine which targeted for aluminum parts of motor cycles and automobiles.The initial cost and running cost can be reduced substantially when compared with a #40 machining center line.
| Max. Spindle speed | 10,000min-1 |
| Travel | 500(700)×400×320+80mm(ATC) |
| Spindle Taper | 7/24-taper No.30 |
| NC Unit | FANUC 0i-MB |
#15 vertical machining center (all-purpose model KIWAMI-series)
MKN-115VT
Vertical type MKN-115VT is a compact machining center with BT15
spindle nose , best suitable for small precision parts like Base plate of
Hard Disc Drive.
This small and light machine provides you with ultimate high speed and
high accuracy.
spindle nose , best suitable for small precision parts like Base plate of
Hard Disc Drive.
This small and light machine provides you with ultimate high speed and
high accuracy.
| Max. Spindle speed | 20,000min-1 |
| Travel | 150×150+50×150(200)mm(X×Y×Z) |
| Spindle Taper | 7/24-taper No.15 |
| NC Unit | MITUBISHI M70VB |
